HoverMower Overview
Chassis details
The chassis consists of only a few but large parts. The front section (white in images) acts as a bumper. This part is not attached fixed to the rest of chassis. Instead there are silicone or rupper dampers, which allows the front cover to move a bit. If the robot hits an obstacle, front cover will slide from its origin position. This mis-placement triggers micro switches. This way, robot can detect, if it hits an obstacle.
Technical details
| length | 580mm |
| width | 400mm |
| height | 230mm |
| weight | xxx |
| max cutting height | 70mm |